|
ACT ELECTRONIC CORPORATION |
 |
|
 |
|
OPU Servo Analyzer |
Model-4501
|
OPU SERVO ANALYZER |
MODEL 4501 | |
|
The MODEL 4501 is Servo Analyzer used for Optical Pick up for optical disc (OPU) to check [observe] the characteristic of Focus/ Tracking servo in actuator performance. This equipment is capable of connecting to Servo Unit made by ACT or to which a connecting terminal for Servo Analyzer is provided. |
This Servo Analyzer is available for reducing its measuring time, and the measurement result shows [is indicated] [displayed] on the external LCD monitor. In addition, the function of GO/ NG judgment is also provided. |
This MODEL 4501 is available for the production line to judge the variation [fluctuation] of phase characteristic which occurs in [caused by] resonance [vibration] of actuator. And also the adjustment for OPU, by connecting a bar cord reader to it, the measured data and two dimensional bar cord labeled on OPU are read and saved in SD memory card. This equipment corrects these original data used for checking rejected product and quality control. | | |
Features |
* |
Compact design, light weight and lower price |
 |
* |
A shorter time for measurement |
* |
A function of GO/NG judgment is provided |
* |
VGA output for result graphs |
* |
Easy to save the measured data |
* |
Easy to save the Screen Copy |
Sample | |
Performance |
Input (A,B) |
|
Voltage range |
from 0.8 to 7.5Vp-p |
|
Impedance |
1M ohm |
|
Dynamic range |
80dB |
Output (SG) |
|
Voltage range |
from 50 to 400mVp-p |
|
Frequency range |
from 10Hz to 50kHz |
|
Frequency sweep |
Log sweep 25, 50, 100, or 200 steps/dec |
|
Waveform |
Sine waves. THD less than 3% |
Analysis |
|
Measuring time |
15 seconds ( at 100Hz to 50kHz) |
|
Amplitude measurement range |
from +40 to -60dB |
|
Measuring accuracy |
+/-2dB |
|
Phase measurement range |
from -180 to +180 |
|
Measuring accuracy |
+/-5 degrees |
Display |
|
Display |
LCD/CRT digital RGB signal |
|
Display size |
VGA (640x480) 16 colors |
|
Judgment function |
GO/NG indication in the range specified, calculating the fitted curve in measured phase data. |
Data save |
|
Saving media |
SD memory card (32 to 256MB) |
|
Saved items |
measured data, bar cord data, measurement time and others |
|
File format |
CSV format |
|
File size |
1MB (data around for250) |
Others |
|
Dimension, Weight |
256(W) x 90(H) x 256(D) Approximately, 2.5kg |
|
Power supply |
AC100V to 240V, 50/60Hz Less than 20VA | | |
 |
|